Norlab

Your partner in Northern Europe for innovative laboratory instruments

pdf

PermeGear H1-SC Side-Bi-Side manual diffusion system
The PermeGear H1-SC Side-Bi-Side manual diffusion system is an apparatus employing a Side-Bi-Side cell for carrying out testing that enables a researcher to measure the release or permeation of a compound into or through membranes.

PermeGear H-Series stirrers
PermeGear H-Series stirrers are made for use with their Side-Bi-Side cells. All but the H1 stirrers have aluminum supply manifolds mounted toward the rear, which connect to a heater/circulator. The long horizontal manifold tubes have hose barb fittings that allow the water jackets of the diffusion cells to be connected to them with latex tubing.

Permegear equipment that measures permeation through membranes
This general brochure features a short presentation of the PermeGear membrane diffusion testing equipment and a comprehensive membrane and selection guidance.

ASI QuickSplit flow splitters
ASI QuickSplit technology can be applied to all applications where a controlled, reproducible split ratio is required including LC-MS, flow fractionation, pre/post column flow splitting, mass directed franction collection and capillary chromatography. ASI flow splitters come in flow rate ranges which make them compatible with nano, micro, analytical and prep HPLC flow rates.

ASI AS650 automated flow splitter
The AS650 is a fully automated modular flow splitter for HPLC and LC-MS. The AS650 is a convenient and cost effective way to convert any HPLC System to deliver nanoliter and microliter flow rates.

QLA product catalog
Quality Lab Accessories (QLA) is a leading manufacturer and supplier of dissolution accessories and consumables, calibration tools and services to pharmaceutical laboratories. This catalog introduces QLA's range of laboratory products and equipment.

Zenix-300 (3 um, 300 Å) for mAb, ADC fragments separation with direct mass spec detection
The columns used in this application were Zenix SEC-300 (3 um, 300 Å, 7.8 x 300 mm), Zenix SEC-300 (3 um, 300 Å, 4.6 x 300 mm), Zenix-C SEC-300 (3 um, 300 Å, 4.6 x 300 mm) and Zenix-C SEC-300 (3 um, 300 Å, 2.1 x 300 mm).

ADC vs. free drug separation and analysis
The columns used in this application were Zenix SEC-80 (3 um, 80 Å, 2.1 x 50 mm), Zenix SEC-80 (3 um, 80 Å, 7.8 x 50 mm) and Zenix-C SEC-80 (3 um, 80 Å, 4.6 x 50 mm).

MAb/ADC fragment separation after IDeS digestion
This application note shows fragment separations using Zenix SEC-300, Zenix-C SEC-300, Proteomix HIC Butyl-NP5 and Proteomix RP-1000 columns.

Intact and reduced mAb/ADC fragment separation on reversed phase chromatography with mass spec detection
The columns used in this application were the Proteomix RP-1000 (5 um, 1000 Å, 4.6 x 100 mm and 5 um, 1000 Å, 2.1 x 50 mm) and the Proteomix HIC Bu-NP5 (5 um, 4.6 x 35 mm).

Pages